
Top-rated4.9 from 999+ verified customers
Seamless K-Style Gutters, Sized to Your Roof
K-style is the gutter on most Northern Virginia houses, and for most of them it is still the right one. We replace it as seamless aluminum in 5-inch or 6-inch, formed at your house, with downspouts sized to match.
Get my gutter replacement estimate or call (703) 499-8654
Replacement projects only.
What is a K-style gutter?
A K-style gutter has a flat back and flat bottom that sit tight against the fascia board, and a curved front that looks like crown molding from the ground. It is the most common gutter on Northern Virginia homes.
The flat back fastens solidly to the fascia, and the shape carries more than twice the water of a half-round gutter of the same width, according to This Old House.
Do you need 5-inch or 6-inch K-style gutters?
Five-inch is the residential standard and handles most roofs here. Six-inch earns its modest upcharge on large roof planes, steep pitches, and valleys that pour a lot of water into one short run.
We size each run to the roof above it, not to whatever the builder put up. The downspouts follow the gutter: 2×3 with 5-inch, and the oversize 3×4 with 6-inch, which drains faster and clogs less. An undersized run tells on itself in a summer thunderstorm, spilling over the same corner every time. Our guide to 5-inch vs. 6-inch gutter sizing goes deeper.
Why seamless instead of sectional?
Because seams are where gutters leak. Seamless K-style is rolled out of aluminum coil on a machine at your house and cut to the length of each run, so the only joints are at the corners, end caps and downspout outlets.
Sectional gutter comes in fixed lengths joined with sealant. Once that sealant starts to go, resealing turns into a yearly chore, and that is usually the point where seamless costs less over the next ten years than patching what is there.
How do new K-style gutters stay put?
With hidden screw hangers, not the long spikes you see on older houses. Spikes driven through the gutter face loosen over years of heat, cold and ice, and that is where the familiar sag comes from.
The board behind the gutter matters as much as the hanger. If the fascia is soft, it gets replaced before the new gutter goes up, sometimes with cellular PVC, which does not rot the way wood can. Fascia and gutters are handled by one crew in one visit. Each run also gets a slight, steady slope toward its downspout: enough to move water, shallow enough that the line still reads level from the street.
Should you add leaf protection to K-style gutters?
If your house sits under real tree cover, yes. The oak and poplar canopy over much of Northern Virginia fills open gutters every fall, and guards end the twice-a-year cleaning cycle. With few trees nearby, they are optional, and we will say so.
We install E-Z Lock screen and Englert MicroGuard, and the cheapest time to add either is while the new gutters are going up. See our gutter leaf protection options or read whether gutter guards are worth it.
What warranty comes with new K-style gutters?
A 20-year material warranty on the seamless gutters and downspouts, and a lifetime warranty on Englert leaf protection. When MicroGuard goes on new gutters with 3×4 downspouts, the system also carries our 10-year clog-free warranty. The details are on our gutter warranties page.
Can you just repair the gutters I have?
No. Sunshine Contracting is a replacement company, so we do not take gutter repair, patching or cleaning calls. The one exception is our own work: if we installed your gutters and they are under warranty, call us, because warranty service on our own installs is ours to handle.
We also do not trench the yard or install buried downspout drains. Every downspout we install stays above ground, with extensions or splash blocks carrying the water away from the foundation. Our downspout sizing and placement page explains how we decide where each one goes.
What do K-style gutters cost in Northern Virginia?
Most whole-house seamless gutter replacements here run $2,000 to $6,000 installed, with smaller homes at the low end. Leaf protection is priced separately. Linear footage, one story or two, the number of corners and downspouts, and 5-inch versus 6-inch move the number.
That is a planning range, not a quote, and there are other options, so reach out if your house does not fit it neatly. Our gutter replacement cost guide breaks it down, financing is available with approved credit, and the price does not change at the kitchen table. If you are weighing a different look, compare half-round gutters and copper gutters, or see all of our gutter services.
K-style gutter questions homeowners ask us
How much do new K-style gutters cost?
Most whole-house seamless K-style replacements in Northern Virginia run $2,000 to $6,000 installed, with smaller homes at the low end and leaf protection priced separately. Footage, stories, corners, downspouts and gutter size move the number. The estimate is free, and the written price does not change at the kitchen table.
Do I need 5-inch or 6-inch gutters?
Most houses do fine with 5-inch. Six-inch makes sense on big roof planes, steep pitches and valleys that dump water into a short run, and it pairs with larger 3×4 downspouts that drain faster and clog less. We size each run to the roof above it rather than copying what was there.
Can you replace just one section of my gutters?
Sometimes. If a few runs have failed and the rest are sound, we can replace the failing runs with new seamless gutter and leave the good ones in place. What we do not do is patch, reseal or re-hang an old run, because we are a replacement company; the one exception is warranty service on a system we installed. At the estimate we will tell you which runs need replacing now and which have years left.
Request a free gutter replacement estimate or call (703) 499-8654.
Need new gutters?
Free at-home consultation, a real number, and no pressure to decide on the spot.
